Beschreibung
SERDI Formstähle wurden in einem modernen CAD system designed und werden hochpräzise auf einer CNC Fräse hergestellt.
Jeder Formstahl durchläuft vor Versand die Qualitätskontrolle um den hohen Anspruchen gerecht zu werden.
Bitte finden Sie anbei unseren aktuellen Formstahlkatalog.
Für Rückfragen stehen wir Ihnen sehr gerne zur Verfügung!
Technische Daten
- Do not use a 0° bit on a 8° Bit Holder or the opposite
- If used as above mentioned, the back of the bit will touch the seat when machining or the bit will be too fragile in the second case.
- The original bit sharpener can be used with the New Style Cutting Bits using SERDI adapter tooling bracket (Reference : 021960)
0° Rake Cutting Angle (Negative):
The bit is perpendicular to the cutting surface (as the SERDI Original Style Tooling). The 0 ° angle tooling can cut different hardness seats (soft & medium) up to 45 Rockwell.
The cutting parameters for the 0 ° angle tooling can remain the same as the SERDI Original Style Tooling but with an easier cut.
8° Rake Cutting Angle (Positive):
The bit is 8° from the perpendicular to the cutting surface.
The 8 ° angle tooling is especially design to cut hard seats 45 Rockwell and up.
The cutting bit is more aggressive on the seat so the vertical pressure decrease and run at a lower Rpm.
SERDI recommends using this type of tooling only on hard seats.